GR Neo 3 with Waveguide & Back Cup (Pair)

$249.00

Price is for a pair.

Includes:

2x GR Neo 3 tweeters
2x Back cups w/ stuffing
2x Waveguides
2x TPU Gaskets

We are now offering our NX-Bravo waveguide as a standalone product for your own DIY projects.
3D Printed in black PLA. (Gaskets printed in black TPU)

Mounting Hole: 5.11″ (129.8mm)
Through hole: 4.31″ (109.5mm)
Faceplate depth: 0.24″ (6.1mm)

Note: This waveguide was designed specifically around our custom GR Neo 3 tweeter with the rear cup.
We cannot guarantee that the tweeter will work well with other Neo 3 style tweeters, or in an open-baffle application

For assembly notes, see pictures & description in the tabs further below.

Categories: ,

Description

Assembly Notes & Best practices:

Do not use the back cups without the included stuffing. It will create standing waves and hard reflections within the cup that will be severely detrimental to the sound.
Too much stuffing will limit the bottom-end extension of the tweeter.

We recommend sealing the cup to the back side of teeter with silicon adhesive or another similar sealants.

Tweeter should be mounted snugly to the waveguide, enough to ensure the tweeter gasket is pressed against the base waveguide.
Do not crank down on the screws as you may damage the screw holes/plastic, it can also create a rougher response in the process.

To best seal the waveguide against the cabinet, we include a gasket, but you can also apply a smooth, thin layer of caulk, silicon, or other similar sealant to either the back-side of the waveguide or to the mounting surface of the baffle, and let it dry/cure before mounting. This will ensure a good seal without directly gluing the waveguide to the cabinet, or needing a separate gasket material that might prevent a flush mount with the baffle.

The waveguide can easily be sanded & painted in thin coats for a nicer finish without affecting performance.
(For best results, use paints/primers intended for plastics & avoid finishes with harsh solvents as they may melt/damage the PLA.

Additional information

Weight 3 lbs
Dimensions 9 × 6 × 6 in

Reviews

There are no reviews yet.

Be the first to review “GR Neo 3 with Waveguide & Back Cup (Pair)”

Your email address will not be published. Required fields are marked *