M130X Woofer
$45.00
This model has been discontinued. None are left available for purchase.
Like the M-130, the M-130X has a curvilinear shaped treated paper cone, allowing a smooth extension into the higher frequency ranges.
Out of stock
Like the M-130, the M-130X has a curvilinear shaped treated paper cone, allowing a smooth extension into the higher frequency ranges. This woofer has incredibly smooth midrange and very good low bass extension. -3db down point in a .4 cubic foot ported enclosure is 55Hz. The XBL2 Motor structure lowers low frequency distortion by keeping a linear BL even at high output levels. X-max is significantly increased as well. It also uses a polymer frame featuring venting beneath the spider plus a vent pole piece. This driver also works great as a mid-bass woofer in an open baffle design. The diameter of the driver frame is 6.125" and mounting depth is 2.625".
Mounting information:
- 4.875" diameter through hole (3/8" or larger round-over required on back side)
- Screw mounts 5.625" apart
- Outer frame: 6.3125"
- Mounting Depth: 3.625"
Additional information
| Weight | 6 lbs |
|---|---|
| Dimensions | 9 × 9 × 6 in |
Thiele/Small parameters
FS 50 Hz
RE 5.51 ohms
Qms 3.664
Qts .409
Qes .460
Xmax 7.8 mm each way
L (1k) .763 mH
L (10k) .324 mH
Vas 14.194 Liters
Ms 8.849 grams
Cms 1118.644 mm/newt
Bl 5.805 Tesla-M
SPL 87.844 db
Area 95.05 sq cm
Reviews
There are no reviews yet.