X-Statik Kit (Pair)


The X-Statik model has been recently tweaked and produces a linear response with an improved level of openness and transparency which surpasses typical boxed speakers. We also offer a base level model and several upgrades to take them to the highest level.

We recommend 2 sheets of No Rez for this model. (not included)

Need a flatpack?
X-Statik flatpack


Need a flatpack?

GR-Research and Denton Woodworkers have teamed up to offer flatpack’s, assembled and finished cabinets for a number of our DIY kits. All flatpack’s are CNC’ed for precise fittings which makes the project much easier.

Currently the X-Statik is the top model in the X Series line. The X-Statik utilizes dual mid-bass drivers in an open baffle configuration. This allows for a very open sound with great imaging and transparency. It creates a very layered and three dimensional sound stage. However, just as with any open baffle design, these must be pulled three feet or more out into the room. They cannot be used against a wall or in a corner of the room.

The DIY kit includes everything but the cabinets and uses the M-165-16 woofers and the latest version of the T26SG tweeter. Crossover parts are high quality throughout. Crossover must be assembled and are to be point to point wired. The kit also includes binding post cups, wire, screws, solder, and heat shrink.

The X-Statik represents the top model in the X-Series product line. As a completed product once produced by AV123 it  was reviewed by Affordable Audio, AV Guide, Gear Patrol, Audioholics, and the Absolute Sound, winning their Top Value award and an Editors Choice award. Stereo Mojo also gave it a Best of Show at RMAF 2008. The latest version is even better using top level parts throughout.

The X-Statik impedance is a nominal 6 ohms and dips to 4 ohms at 275Hz. The sensitivity averages 90db . The in room -3db down point will vary from room to room from high 40's to upper 60's.

The X-Statik's lower woofers utilize a sealed box design design for clean and tight bass that can be easily blending to a sub.

They are ideal for two channel and home theater applications.

​A Sonicap and tube connector upgrade will take clarity and detail levels into the leagues of the cost no object speakers. The tube connectors are the highest quality connectors currently on the market. They offer improved clarity across the board and are extremely easy to install. The tube connector upgrade is $50. Lining the cabinets with No Rez is also recommended. You will need two sheets of No Rez for the pair.

Additional information

Weight 45 lbs
Dimensions 17 × 17 × 22 in
Capacitor Upgrade

Standard Capacitors, Add Sonicaps to Tweeter Circuit ($249)

Connector Upgrade

Standard Binding Post Cup, Tube Connectors ($55)

Cabinet Plans


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Frequency Response

Horizontal Response

Spectral Decay

Vertical Response


In Room*

* In-room responses will naturally vary from room to room, especially below 500Hz and are dependent on speaker placement, listening position and room treatment.